Acer ENTJ75 Benutzerhandbuch

www.packardbell.com

113

Replacing the LCD assembly lid

Tools you need to complete this task:

Screws removed during this task:

•

1 black M2×5 (hard drive)

•

1 black M2.5×6 (optical drive)

•

3 black M2.5×6 (keyboard cover)

•

 2 black M2.5×6 (LCD panel hinges - bottom)

•

 2 black M2.5×6+Nylok (LCD panel hinges - top)

•

4 black M2.5×6+Nylok (LCD front panel)

•

 2 chrome M2×4 (LCD hinge covers)

•

4 black M2.5×6+Nylok (LCD front panel)

•

4 black M2.5×5 (LCD panel hinges)

To replace the antennas:

 

1

Complete the steps in 

.

2

Remove the LCD panel assembly by performing steps 

 of the 

 procedure on 

.

3

Remove the LCD front panel by performing steps 

–

 of the 

 procedure on 

4

Remove the LCD by performing steps 

 of the 

procedure on 

5

If you are going to use the same Kensington lock cap, power button 

assembly, webcam, microphone and wireless antennas, remove these items 

from the old LCD assembly lid and attach them to the new one. Refer to 

the related replacement procedure on previous pages for instructions. 

6

Place the LCD on the new LCD assembly lid. 

7

Return the hinge screws to their places. 

Phillips #0 screwdriver

Flat screwdriver

 or

 Non-marring plastic scribe