Fujitsu 480 Benutzerhandbuch

C122-E003-02EN

4-27

 

MMB

4.4 Update Commands

The following commands are used to update firmware:

z update MMB
z update BMC
z update EFI
z update SAL

This section describes how to use these commands.

This command downloads an MMB firmware file from the specified URL and 
updates MMB firmware.

The input format for the URL is as follows:

http://host/path/file
ftp://host/path/file

A URL cannot be accessed through a proxy server.

Note:

The MMB must be rebooted when MMB firmware is updated.  To prevent an 
interruption in MMB service during an update, Fujitsu recommends updating 
the standby MMB first, making it the active MMB, and then updating the 
other MMB.

z Privilege: Users with the Admin privilege or CE privilege

0: Updates MMB firmware on MMB#0.

1: Updates MMB firmware on MMB#1.

both: Updates MMB firmware on both MMB#0 and #1.

noverify: Disables the verify check.

quiet: Updates the firmware without interactive operation involving the user.

update MMB [0 | 1 | both] <url> [noverify] {quiet}