Fujitsu 480 Benutzerhandbuch
C122-E003-02EN
8-219
GSWB
8.3 Operation Commands
8.3.5
VLAN-related commands
8.3.5.1 show vlan
This command displays parameters of all VLANs defined on the switch or a specific
VLAN (whose VLAN ID or name is specified) defined on the switch. If no port-
channel port has been created, "none" is displayed for the corresponding interface. A
VLAN can be displayed by the show vlan command only when the VLAN has been
created and allocated by the switchport command.
VLAN (whose VLAN ID or name is specified) defined on the switch. If no port-
channel port has been created, "none" is displayed for the corresponding interface. A
VLAN can be displayed by the show vlan command only when the VLAN has been
created and allocated by the switchport command.
(1) Synopsis
(2) Options
z [id <vlan-id>|name <vlan-name>] (optional)
If you specify id, specify vlan-id next. The range of values that can be specified
for vlan-id is between 1 and 4094.
for vlan-id is between 1 and 4094.
If you specify name, specify vlan-name next.
If this option is omitted, the command will display all configured VLANs.
(3) Command Mode
user exec
enabled exec
(4) See also
show interface switchport
show vlan [id <vlan-id> | name <vlan-name>]