Fujitsu 200 Benutzerhandbuch

Powering the PenCentra 200

2

The PenCentra 200 can be powered by either its rechargeable battery pack or by AC 
power adapter. 

Removing and Installing a Battery Pack

2

To remove the PenCentra 200 battery pack, perform the following steps:

1. Save any active data and suspend your system.

2. Hold the system face down, with the arrow on the battery compartment pointing 

towards you (see Figure 2-3).

3. Using the back end of the system pen (not the tip), push the spring-loaded battery 

latch to the left. 

4. While the battery latch is pushed to the left, slide the battery pack out of the 

battery tray by pulling it towards you. When the battery is clear of the latch 
mechanism, release the battery latch.

5. Resume system operation.

Battery Pack

Battery Pack
Latch

PS/2-style
Port