Fujitsu 200 Benutzerhandbuch

Using the Hotpads

2

The PenCentra 200 hotpads are arranged vertically on the left-hand side of the 
screen. The following table identifies each hotpad on the PenCentra 200, and offers a 
description of its use.

This hotpad changes the LCD backlight brightness by 
cycling through the following states:

Color Reflective LCD (outdoor/indoor display):
Low ->Medium ->High ->Off -> Low... 

Color Transmissive LCD (indoor display):
Very Low -> Low -> Medium -> High -> Very Low...

The hotpad defaults to whatever level was set when the 
system was suspended. This hotpad does not repeat if 
held down.

When tapped, LCD contrast becomes lighter by one 
step. The contrast range is 16 steps.

This hotpad repeats if held down.

When tapped, LCD contrast becomes darker by one 
step. The contrast range is 16 steps.

This hotpad repeats if held down.

Tapping this hotpad causes the next pen tap to be 
interpreted by the system as a right-mouse click. All 
subsequent taps are interpreted as left-mouse clicks, 
unless preceded by a tap of this hotpad.

This hotpad adjusts the volume of the signal fed to the 
internal speaker and the headphone jack. This hotpad 
cycles through the following states:

High -> Medium -> Low -> Off -> High... 

This hotpad does not repeat if held down.