FIC M296 Benutzerhandbuch
Outline of the M295 / M296
Type:
[None] / [ATAPI
Removable] / [CD-ROM] /
[User] / [Auto]
Removable] / [CD-ROM] /
[User] / [Auto]
Select the drive type corresponding to the
fixed disk installed in your system. If type
USER is selected, Cylinders, Heads &
Sectors edited directly.
fixed disk installed in your system. If type
USER is selected, Cylinders, Heads &
Sectors edited directly.
Total Sectors:
39070080
(BIOS auto detect, for information only)
Maximum Capacity:
20004MB
(BIOS auto detect, for information only)
Multi-Sector
Transfers:
Transfers:
[Disabled] / [2 Sectors] /
[4 Sectors] / [8 Sectors] /
[16 Sectors]
[4 Sectors] / [8 Sectors] /
[16 Sectors]
Determine the number of sectors per
block for multiple sector transfers.
block for multiple sector transfers.
LBA Mode Control:
[Disabled] / [Enabled]
Enabling LBA causes Logical Block
Addressing to be used in place of
Cylinders, Heads & Sectors
Addressing to be used in place of
Cylinders, Heads & Sectors
32 Bit I/O:
[Disabled] / [Enabled]
This setting enables or disables 32 bit
IDE data transfers
IDE data transfers
Transfer Mode:
[Standard] / [Fast PIO 1] /
[Fast PIO 2] / [Fast PIO 3] /
[Fast PIO 4] / [FPIO 3 /
DMA1] / [FPIO 4 / DMA2]
[Fast PIO 2] / [Fast PIO 3] /
[Fast PIO 4] / [FPIO 3 /
DMA1] / [FPIO 4 / DMA2]
Select the method for moving data
to/from the drive. Autotype the drive to
select the optimum transfer mode
to/from the drive. Autotype the drive to
select the optimum transfer mode
Ultra DMA Mode:
[Disabled] / [Mode 1]
[Mode 2]
[Mode 2]
(BIOS auto detect, for information only)
1.5.2 Using the Advanced Menu
The Advanced Menu allows you to configure the OS and I/O device settings.
P h o e n i x B I O S S e t u p U t i l i t y
Main
Advanced
Security
Boot
Exit
Item Specific Help
NumLock:
[Off]
Selects Power-on
TV System
[PAL]
State for NumLock
Sub-System Select
[Normal PAL TV]
PS/2 Mouse
[Both]
LCD Panel View Expansion
[Enabled]
Embedded Share Memory
[32MB]
Graphics Aperture
[256MB]
EmbedDed Audio Device
[Enabled]
Summary Screen:
[Disabled]
4
I/O Device Configuration
F1
Help
K
Select Item
-/+
Change Values
F9
Setup Defaults
Esc
Exit
st
Select Menu
Enter
Select
Sub-Menu
F10
Save and Exit
Figure 1-14
BIOS Setup Advanced Menu
FIC M295 / M296 Service Manual
1-23