Wacom 21UX Benutzerhandbuch
Unpacking your Cintiq
Page 11
UNPACKING AND MOUNTING THE CINTIQ PEN DISPLAY
Remove any packing materials from the back of the display unit and cabling.
Mount Cintiq on the stand:
•
Make sure the stand is placed in a stable position on your desktop or other work surface so that it
will not tip or fall when Cintiq is mounted on it. Securely grasp Cintiq with both hands; the display
should face toward you, with the power switch and LEDs located at the top.
will not tip or fall when Cintiq is mounted on it. Securely grasp Cintiq with both hands; the display
should face toward you, with the power switch and LEDs located at the top.
•
Align Cintiq parallel to the front of the stand so the bearing hub is located between the V-shaped
upper edges of the stand’s bearing recess. The V-shaped edges will serve as a guide for
positioning the bearing hub. See – A – below.
upper edges of the stand’s bearing recess. The V-shaped edges will serve as a guide for
positioning the bearing hub. See – A – below.
•
With the back of Cintiq resting against the stand, lower Cintiq until the bearing hub rests securely
in the bearing recess. See – B – on the following page. The display unit will be held in place by
gravity; there will be no audible ‘snap’ to indicate a mechanical lock.
in the bearing recess. See – B – on the following page. The display unit will be held in place by
gravity; there will be no audible ‘snap’ to indicate a mechanical lock.
If you do not need to rotate the Cintiq pen display, you can secure it to the stand with the rotation lock
screws. See “Optional display configurations” on page 61.
screws. See “Optional display configurations” on page 61.
To learn about other mounting options, see “Using an alternate mount or stand” on page 62.
Bearing hub
Bearing recess
– A –