Texas Instruments 660 Benutzerhandbuch

Field Service    6-27

The procedure for removing and replacing the Display FRUs is as follows:

Turn off the computer; disconnect the AC power adapter (if attached), and 
remove the battery packs as described in Paragraphs 6.5.1 and 6.5.2.

Press the Cover Release Latch and open the notebook to a full 180 degree 
position.

Remove the Cover-Display Assembly as described in Paragraph 6.5.9.

Refer to Figure 6-21 and remove the desired display FRU.

Replacement is the reverse of Steps 1 through 4.

Flex Cable, 
Main to
Transfer

LCD Flex
Cable

Display
Cover

Display
Bezel

LCD
Panel

Inverter
PWB

Transfer
PWB Assembly

Flex Cable,
Transfer to 
Inverter