Wacom DTU-2231 Benutzerhandbuch

13

13

Interactive pen display

STEP 1: DISPLAY INSTALLATION

In this step, the interactive pen display is installed as a monitor on your system.

Important: Do not connect the USB data cable until instructed to do so.  Never connect or disconnect the 

video or power cables while your computer or pen display are powered on.  This can damage the 
display or video card.

1. Turn off your computer.

2. If your computer has only one video connector, unplug your previous monitor or add a second video 

card.  Determine if your computer has a digital (DVI) or analog (VGA) connector and set the DVI/VGA 
switch for the video connection you are using.  See  – A –  in the 

.

3. Making sure to tighten the connector thumbscrews, follow the below instructions for your video 

connector.  See  – B –  in the 

4. Connect the power adapter to the pen display.  See  – C –  in the 

.

5. Connect the adapter power cable and plug into an AC outlet.  See  – D –  in the 

.

6. Turn on the pen display.  The power LED will light orange.

For DVI operation, connect the supplied DVI-D to DVI-I video cable between the DVI-I 

IN

 

connector located on the pen display unit and the DVI connector on your video card.

For VGA operation, connect the supplied VGA to DVI-I cable between the DVI 

IN

 connector 

located on the pen display unit and the VGA connector on your video card.

If connecting to a Mac Mini DisplayPort, you will need to obtain an appropriate adapter.  
For best results the Apple Mini DisplayPort to Dual-Link DVI Adapter is recommended.  
Adapters can be purchased at various retail outlets and through the online Apple Store.

Connect the adapter between the pen display DVI cable and your Macintosh.

DVI-I connector

DVI-D 

connector

VGA connector