Intel 317443-001US Benutzerhandbuch

Intel

®

 Core

TM

 2 Duo processor with the Mobile Intel

®

 945GME Express Chipset

May 2007

Manual

Order Number: 317443-001US

 

43

The following LEDs provide status for various functions on the Intel

®

 945GME Express 

Chipset board.

The microcontroller for system management/keyboard/mouse control can be upgraded 

in two ways. The user can either use a special MS-DOS* utility or use an external 

computer connected to the system via the serial port on the board. 

Make sure the motherboard is not powered on and the power supply is disconnected 

before moving any of the jumpers.

To program the microcontroller via the utility, the user must ensure that jumper J9H1 is 

populated. Once the programming is complete, jumper J9H1 should be unpopulated.

If the user chooses to use an external computer connected to the system via the serial 

port, there are five jumpers that have to be set correctly first. Please refer to 

 

for a summary of these jumpers and see 

 for the location of each jumper. 

Here is the sequence of events necessary to program the H8.

1. With the board powered off, move the five jumpers listed in 

 to the 

programming stuffing option.

2. Power the S5 voltage rails by attaching an AC brick or an ATX power supply to the 

system.

Keyboard Number Lock

CR9G1

Keyboard Scroll Lock

CR9G2

Keyboard Caps Lock

CR9G3

System State S0

CR3G1

System State S3

CR3G2

System State S4

CR3G3

System State S5

CR2G1

ATA Activity

CR7J1

VID 0

CR1B1

VID 1

CR1B2

VID 2

CR1B3

VID 3

CR1B4

VID 4

CR1B5

VID 5

CR1B6

VID 6

CR1C1