Barco MFGD 3621 Benutzerhandbuch

BarcoMed control panel operation

65

BarcoMed control panel operation

This chapter describes how to configure the displays in your Barco 
Medical Imaging Display System using the tools available through the 
Advanced button on the Settings tab of the Windows Display Control 
Panel.

Accessing the Barco tab

Note: 

You must have logged on to Windows using an account with 

administrator privileges in order to use the Barco portions of the 
“Windows Display Control Panel” to change any display settings.

Open the “Windows Display Control Panel” by one of the two 
methods below:

Start > Settings > Control Panel > Display

or

Open the “Display Properties Control Panel” by right clicking 
in an empty area on the desktop, then select “Properties”.

Click on the “Settings” tab.

Select the “rectangle” that represents the Barco display whose 
settings you wish to change.

Click on the “Advanced” button.

Select the “Barco” tab from the Properties screen.

Using the Barco tab

The Barco tab is divided into three sections. The first section provides 
information about the graphics controller and allows access to the 
graphics controller advanced configuration pages. The second section 
provides information about the display. The bottom section allows 
access to two Barco tools, Barco System Report and Barco’s softcopy QA 
solution, MediCal QAWeb, MediCal Pro or Niowatch, depending on which 
solution is installed on your system. Also, there is a active link to the 
Barco Medical Imaging web site.