Barco 6MP Benutzerhandbuch

Coronis Fusion 4MP/6MP

OSD Orientation

Select the desired orientation of the on-
screen display. The default position is 
Landscape, but if you put the display in 
portrait orientation (possible but not 
supported), you should select Portrait as 
OSD orientation as well. If not, the OSD will 
not be easily readable.

Input Switch Mode

Select “Auto” if you wish the display to 
select the video inputs automatically. If 
only one video input is connected, the 
image will be shown in the center of the 
screen. If both video inputs are connected, 
the video signal connected to the “Left” 
input is shown on the left side of the 
screen and the signal connected to the 
“Right” connector is shown on the right 
side. If one of the video signals exceeds 
the resolution of 1640x2048, the signal is 
suppressed.

Select “Left” to display only the signal 
connected to the “Left” video input.

Select “Right” to display only the signal 
connected to the “Right” video input.

Preferred Input

Select the video resolution you wish the 
connected graphic board(s) to reproduce. 
Before changing this setting you must 
switch off the PC. After changing the 
setting, switch on the PC so that the 
graphic board changes its resolution.

This function takes effect with plug-and-
play graphic boards only.

More information can also be found in the 
Getting Started manual.