B&B Electronics Zlinx 485 Benutzerhandbuch

 

11. Click Connect.  

12. Re-apply power to the Zlinx 485 Base module. The Power LED should light up. 

13. The Zlinx 485 Firmware Updater window opens and displays a list of the base and 

expansion modules. 

14. On the module list, select the base or expansion module to be updated. 

15. In the Firmware Image drop down box, select the image file (.hex). 

16. Click the Program button to load the firmware into the module. 

17. When all updates are complete, click Exit. 

18. Before reconnecting the I/O run the Zlinx 485 Manager software and check to ensure 

all modules are configured properly. 

19. When the configuration check is complete: 

a.  Exit the Zlinx 485 Manager program 

b.  Disconnect power from the Base Module 

c.  Reconnect the I/O. 

20. Re-connect power to the Base Module.