B&B Electronics 3PXCC1A Benutzerhandbuch
Documentation No.3PXCC1x-2x-3903
17
B&B Electronics Mfg Co – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104
B&B Electronics Ltd – Westlink Comm. Pk – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445
Adding Serial Port(s) in Windows NT 4.0
Go to Start Menu / Settings / Control Panel.
Double-click on Ports.
Click Add.
Choose COM Port Number, Base I/O Address, and IRQ that you
want to use for the new Serial Port(s) being added.
After clicking OK, you will see a screen – System Setting
Change. Click the button Restart Now to restart Windows NT 4.0.
At this point you can shut down the system and physically install
your B&B Electronics Serial Card into an available ISA slot. Double
check to make sure the addresses and IRQ’s on the Serial Card are
set to the correct settings.
check to make sure the addresses and IRQ’s on the Serial Card are
set to the correct settings.
18
Documentation
No.3PXCC1x-2x-3903
B&B Electronics Mfg Co – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104
B&B Electronics Ltd – Westlink Comm. Pk – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445
Checking Windows 2000 for Available Address/IRQ’s
Click on Start / Settings / Control Panel.
Double-click on System.
Click on Hardware.