B&B Electronics ETCIACT Benutzerhandbuch

Seite von 10
Documentation Number ETCIACT0698 Manual 
 
B&B Electronics  --  PO Box 1040  --  Ottawa, IL  61350 
PH (815) 433-5100  --  FAX (815) 433-5105
 
Chapter 1:  Model ETCIACT Ethernet Adapter Card
 
 
 
This chapter introduces the ETCIACT Ethernet adapter card and 
describes the features, unpacking information, and description of the LED 
indicators. 
 
1.1  Introduction 
 
The ETCIACT allows portable 
computers with a type II PCMCIA slot 
to connect to a network. The 
ETCIACT is software configurable 
requiring no jumper settings or 
switches.  The card is compatible with 
Novell’s NE2000 and supports the 
PCMCIA Card Information Structure 
(CIS).  The Adapter Card also supports 
an Enable program that automatically detects your PC’s controller type.  
The ETCIACT provides for an RJ-45 (UTP) or a BNC (Thinnet) 
connection.  Two LED’s  (TX, LK) provide network traffic information. 
 
1.2  Features 
  No external power required 
  Low power consumption 
  Allows for “Hot Swap” insertion and removal 
  Conforms to PCMCIA release 2.1, JEIDA 4.1 
  Compatible with Ethernet II, IEEE 802.3, 10Base2, 10BaseT 
  Compatible with Novell’s NE2000 
  Compatible with type II PCMCIA slot 
  Auto-detection of medium type (twisted-pair/coaxial cable) 
  Two diagnostic LED’s  (TX , RX) 
 
1.3  Package Contents 
  ETCIACT Ethernet Adapter Card 
  BNC connector 
  PCMCIA Medium Coupler 
  3.5” driver disk 
  This manual 
 
 
1.4  LED Indicators 
  TX LED    ON indicates the Adapter is transmitting or receiving data 
  LK LED    ON indicates data packet received or the link integrity 
pulse is detected for UTP