B&B Electronics ES1AWB Benutzerhandbuch

Manual Documentation Number: ES1AWB-2907m  

 pn6908-rev003

 

B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com 

B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com

Chapter 

5 

         

 

 

 

 

 

21 

Select TCP Sockets to implement Direct IP Mode using TCP. When using 
TCP Sockets your serial server can be configured as a TCP server or TCP 
client.  

If your ES1AWB is configured as a TCP server, other network 
devices can initiate a TCP connection with the serial device 
connected to the ES1AWB serial port. (This is also referred to as 
reverse telnet.) Network devices initiating connections must be 
configured with the IP address of the ES1AWB and the TCP port 
number associated with its serial port.  

After selecting TCP Sockets, click Apply to return to the Serial 
Port Configuration page. Select the TCP Server Settings as 
required by your application. 

  

For each option, the TCP port number is shown. You can also 
Enable TCP Keep Alive for each selection. (If Enable Keep Alive 
is selected the connections is maintained even if no data is being 
sent.) 

If your ES1AWB is configured as a TCP client it will automatically 
establish a bi-directional TCP connection between the serial device 
and a server or other networked device. Selecting Automatically 
establish TCP connections enables this feature and its 
configuration options become available.