3com 7600 Benutzerhandbuch
Emulated LAN Connections
12-9
Figure 12-1 VCCs in LAN Emulation Components
LEC Configuration
and Status
Information
The following information about the configuration of the bridge LEC in
the ELAN to which it belongs including connections to LECS, LES and BUS
can be displayed to the operator (see “Display Current LEC
Configuration” on page 8-4).
the ELAN to which it belongs including connections to LECS, LES and BUS
can be displayed to the operator (see “Display Current LEC
Configuration” on page 8-4).
Table 12-3 LEC Configuration and Status Information
LECS Information
Description
ATM Address
The ATM address of the LECS. This address is obtained from the attached ATM Switch
during initialization of the LEC. It is obtained via ILMI or, alternatively, retrieved from
flash (manually assigned). If the address is not available by these methods, the
well-known address is used to open a configuration VCC. The well-known address is
displayed in this case.
during initialization of the LEC. It is obtained via ILMI or, alternatively, retrieved from
flash (manually assigned). If the address is not available by these methods, the
well-known address is used to open a configuration VCC. The well-known address is
displayed in this case.
Config VCC
VPI/VCI values of the configuration VCC to the LECS. It is an VCC which is determined
during initialization of the LEC using the above LECS ATM address.
during initialization of the LEC using the above LECS ATM address.
LES Information
Description
ELAN Name
The alphanumeric name of the Emulated LAN (ELAN) to which the LEC belongs. A
default physical name is automatically provided when the LEC joins the ELAN. This
physical name can be replaced with a descriptive name by management.
default physical name is automatically provided when the LEC joins the ELAN. This
physical name can be replaced with a descriptive name by management.
LEC ID
LAN Emulation Client (LEC) identification assigned by the LES.
abtthgde.book Page 9 Tuesday, June 23, 1998 10:29 AM