3com 7600 Benutzerhandbuch
14-2
C
HAPTER
14: D
EVICE
M
ANAGEMENT
Figure 14-1 User Interfaces and Protocols used to access the 7600 Card
In-Band &
Out-of-Band
Management
Out-of-Band
Management
Configuration of the 7600 Card can be performed via an Administration
Console or an SNMP-based external network management application
running on a workstation.
Console or an SNMP-based external network management application
running on a workstation.
There are two ways of managing the 7600 Card:
Q
In-band, using virtual terminal protocols or SNMP network manager
protocol. Each SNMP network manager has its own user interface to
the management facilities.
protocol. Each SNMP network manager has its own user interface to
the management facilities.
Q
Out-of-band, by connecting a VT100 terminal (or a PC with terminal
emulation software) to the serial port on the CELLplex 7000 unit in
which the 7600 Card is installed. The VT100 management interface,
which is a menu-driven user interface built into the 7600 Card, is
used. This management interface provides many of the same features
as SNMP management.
emulation software) to the serial port on the CELLplex 7000 unit in
which the 7600 Card is installed. The VT100 management interface,
which is a menu-driven user interface built into the 7600 Card, is
used. This management interface provides many of the same features
as SNMP management.
abtthgde.book Page 2 Tuesday, June 23, 1998 10:29 AM