3com 7600 Benutzerhandbuch
5-2
C
HAPTER
5: C
ONFIGURING
V
IRTUAL
LAN
S
Example
Enter:
[6] [1]
The following is displayed:
Figure 5-1 Bridge Configuration Display
Attach Fast
Ethernet Port to
Bridge
Ethernet Port to
Bridge
Enter the bridge number and a Fast Ethernet port to attach a specific Fast
Ethernet port to the bridge. The initial default configuration is a single
bridge that includes all Fast Ethernet ports and an ATM connection. For
general information about bridges see “Bridges in the 7600 Card” on
page 12-10.
Ethernet port to the bridge. The initial default configuration is a single
bridge that includes all Fast Ethernet ports and an ATM connection. For
general information about bridges see “Bridges in the 7600 Card” on
page 12-10.
Table 5-1 Task Actions
Menu
Sequence
Sequence
Enter
Result
[6] vns
[1] display
[1] display
None
Current bridge configuration
parameters are displayed
parameters are displayed
Table 5-2 Bridge Configuration Parameters
Parameter
Description
Bridge
The bridge number
Fast Ethernet Ports
The Fast Ethernet ports assigned to the bridge.
ATM
Q
Yes: The internal ATM downlink port is assigned to
the bridge (i.e., the bridge is connected to an ELAN)
the bridge (i.e., the bridge is connected to an ELAN)
Q
No: The internal ATM downlink port is not assigned
to the bridge
to the bridge
ELAN name
The ELAN name (if connected).
----------------------------------------------------------------------------
| Bridge | Ethernet ports | ATM | ELAN name (ATM)
+--------+-------------------------+-----+----------------------------------
| 0 | 1-2 | YES | elan3576_0
| 1 | 3-4 | YES | elan3576_1
abtthgde.book Page 2 Tuesday, June 23, 1998 10:29 AM