8e6 Technologies R3000IR Benutzerhandbuch

8

e

6 R3000iR Q

uick

S

taRt

G

uide

Before rack mounting the server, the physical environment should be set up to safely 

accommodate the server. Be sure that:

The weight of all units in the rack is evenly distributed. Mounting of the equipment in 

the rack should be such that a hazardous condition is not achieved due to uneven 

mechanical loading.

The rack will not tip over when the server is mounted, even when the unit is fully 

extended from the rack.

For a single rack installation, stabilizers are attached to the rack.

For multiple rack installations, racks are coupled together.

Reliable earthing of rack-mounted equipment is maintained at all times. Particular 

attention should be given to supply connections other than direct connections to the 

branch circuit (e.g. use of power strips).

A power cord will be long enough to fit into the server when properly mounted in the 

rack and will be able to supply power to the unit.

The connection of the server to the power supply will not overload any circuits. Con-

sideration should be given to the connection of the equipment to the supply circuit 

and the effect that overloading of the circuits might have on overcurrent protection 

and supply wiring. Appropriate consideration of equipment nameplate ratings should 

be used when addressing this concern.

The server is only connected to a properly rated supply circuit. Reliable earthing 

(grounding) of rack-mounted equipment should be maintained.

The air flow through the server’s fan or vents is not restricted. Installation of the 

equipment in a rack should be such that the amount of air flow required for safe 

operation of the equipment is not compromised.

The maximum operating ambient temperature does not exceed 104°F (40°C). If 

installed in a closed or multi-unit rack assembly, the operating ambient temperature 

of the rack environment may be greater than room ambient. Therefore, consideration 

should be given to installing the equipment in an environment compatible with the 

maximum ambient temperature (Tma) specified by the manufacturer.

•

•

•

•

•

•

•

•

•

•