Texas Instruments TMS370 Benutzerhandbuch
Properly Installing the Programmer Hardware
1-8
Introduction and Installation
1.3
Properly Installing the Programmer Hardware
Correctly installing the programmer hardware is essential to the proper opera-
tion of programmer system. The following subsections explain how to connect
the programming board to the PDS base unit and the required power connec-
tions for connecting your programmer to a PC or TMS370 XDS. Also included
in these subsections is a description of how to properly insert DIPs and PLCCs.
tion of programmer system. The following subsections explain how to connect
the programming board to the PDS base unit and the required power connec-
tions for connecting your programmer to a PC or TMS370 XDS. Also included
in these subsections is a description of how to properly insert DIPs and PLCCs.
1.3.1
Connecting a Programmer to the PDS Base Unit
Connecting the programmer to the PDS is essentially the same for all program-
mers. The illustrations below show this process for the microcontroller pro-
grammer.
mers. The illustrations below show this process for the microcontroller pro-
grammer.
1) Line up the plastic tabs on the bottom of the programmer board with the
insertion hole in the top of the PDS base unit.
2) Press firmly until tabs are set.
3) Connect the ribbon cable from the PDS base unit to the connection on the
3) Connect the ribbon cable from the PDS base unit to the connection on the
back of the programmer.
PDS base unit
ribbon cable
microcontroller
programmer
programmer
ribbon
cable
connection
cable
connection
connected PDS base
unit
and programmer board
unit
and programmer board