UltraViolet Devices V-Flex Benutzerhandbuch
19-2021 Rev E, 06/05/07
15
3. Allow the lamp to cool for at least 15 minutes.
4. Depress lamp release button and remove lamp. Be careful not to strike or hit the lamp
4. Depress lamp release button and remove lamp. Be careful not to strike or hit the lamp
glass with the enclosure edges.
5. Insert new lamp into the Lamp Module. Depress lamp release button and insert lamp.
Let go of the lamp release button and verify that lamp is retained.
6. Reconnect the power to the HVAC system.
7. Clean the lamp (see Cleaning the Lamps) to remove any fingerprints or dirt on the glass.
7. Clean the lamp (see Cleaning the Lamps) to remove any fingerprints or dirt on the glass.
This device contains mercury in the sealed ultraviolet bulb(s). Do not place your
used bulb(s) in the trash. Dispose of properly.