UltraViolet Devices V-Flex Benutzerhandbuch
19-2021 Rev E, 06/05/07
4
APPLICATION
When installed in forced air heating and cooling systems, the V-Flex kills airborne and surface
microorganism contaminants. It is designed to be mounted in-duct for airborne, “on-the-fly”
applications as well as surface irradiation applications. The design allows for many different
levels of UV dosage. Proper dosage is affected by many factors, such as air temperature,
velocity, and duct reflectivity. The space between supports (typically 32”) and the space between
rows (typically 24” for surfaces and 12” to 18” for moving air streams) can be increased or
reduced to adjust for dosage.
See your Altru-V dealer or sales representative for assistance, as required.
INSTALLATION
1. Read these instructions carefully. Failure to follow the instructions could damage the
product or cause a hazardous condition.
2. Check the electrical rating given in the instructions and on the product to make sure the
product is suitable for your application.
3. To avoid accidental exposure to ultraviolet light, the power supply to this product
must be electrically interlocked. Interlock switches must be installed at any
access panel or door within view of the UV fixtures.
access panel or door within view of the UV fixtures.
4. The installer must be a trained, experienced service technician.
5. After installation is complete, check out product operation as provided in this guide.
6. If the HVAC system has been in use prior to installation, it is recommended that debris
5. After installation is complete, check out product operation as provided in this guide.
6. If the HVAC system has been in use prior to installation, it is recommended that debris
and buildup on coils and HVAC system surfaces be cleaned.
Product Registration
Thank you for purchasing this product from UVDI! Prior to any other installation activities,
please proceed with registering you product via the web at
http://www.altruv.com
or by
returning the enclosed self-addressed postcard. Product registration will insure that your
warranty is handled in a proper and expeditious manner. In addition, it will allow UVDI to
provide you with important updates regarding your new product including reminders of
when replacement parts are needed and also make you eligible for future parts discounts
warranty is handled in a proper and expeditious manner. In addition, it will allow UVDI to
provide you with important updates regarding your new product including reminders of
when replacement parts are needed and also make you eligible for future parts discounts
CAUTION
Personal Injury Hazard
Power supply can cause electrical shock.
Disconnect power supply before beginning installation. Do not open lamp knob. There are no
user serviceable components inside. Professional installation is required per NEC standards
.
WARNING
UV Light Hazard
Harmful to bare skin and eyes.
Can cause temporary or permanent loss of vision.