Net2Phone Max 410 Benutzerhandbuch

 
 

ensure that after the upgrade, the faxes will be 
transmitted using the T.38 fax protocol on the 
Net2Phone network. 

a.  In the Web Manager, click the Account Config 

link in the sidebar menu. 

b.  For each port that has a setting of Y in the FAX 

Only field, click the N radio button.  If no ports 
are set to Y, you can proceed to the Performing 
the Upgrade section below. 

c. Click 

the 

Save Changes button at the bottom of 

the page to save the settings. 

Once you have completed this procedure, proceed to the 
following section, Performing the Upgrade. 

1. Click 

the 

Download button to download the 

executable file to the C:\Net2Phone\Upgrade folder. 

2.  Open your Windows Explorer and navigate to the 

C:/net2phone/upgrade folder.  Double-click the 
max4x0up.exe file to begin the upgrade process. 

3.  You will be prompted for the following information: 

a. User 

Name 

b. Password 

c. 

Max IP Address 

4.  Follow the remaining prompts to complete the 

upgrade. 

If you encounter any problems after you have upgraded 
the Max, including faxing, calling, receiving calls, etc., re-
load the factory default settings and re-enter your 
configuration settings. 

1.  In the Web Manager, click the Load Default Config 

link in the sidebar menu.