Verizon 7500 Benutzerhandbuch

 

 

 

 
 

030-300536 Rev. A 

130 

     August 2007 

Close 

Clicking this button closes the security log screen. 

Clear log 

Clicking this button removes all entries from the log. 

Settings 

Clicking this button opens a new window that contains configuration settings for 
selecting the information that you want logged. 

Printable/savable format 

Clicking this button opens a new window that contains a list of all the logged 
packets that can be saved or printed. You can send a copy of the Firewall log to a 
designated printer. 

Refresh 

Clicking this button updates the screen so that it displays the most current data. 

Time 

Displays the time that the packet was sent. 

Direction/Source 

Displays the direction of transmission. 

Rule/Reason 

Displays the internal rule that caused the logged event. The internal rule is set up 
under Firewall rules. 

Alert 

Displays a description of the logged event. 

Details 

Displays details about logged event. 

 
If you clicked Settings in the preceding Security Log screen, the following Firewall Log Settings screen will 
appear. This screen allows you to configure firewall remote logging. Remote logging allows the firewall logs to be 
sent to a machine running a syslog server. 
 
NOTE: The syslog server must be configured to isten on udp port 514, which is usually the default port. In order for 
the logs to be saved to the syslog server, the server should be configured to save the logs to a file. Some of the free 
syslog servers available on the Internet are kiwisyslog, MT_syslog and 3Csyslog. 
 
To configure Remote Logging, do the following: 
 

1.  Select the desired firewall log settings from the drop-down menus. 
2.  Click the Enable check box below Remote Logging (a check mark will appear in the box). 
3.  Type the IP address of the syslog server in the Remote IP Address field. 
4.  Click Apply to allow the settings to take effect.