Omron CS1W-RPT01 Benutzerhandbuch
116
Setting Data Links
Section 5-2
First data link sta-
tus word
tus word
Set the first word to store data link status. An area of 16 words is
used.
used.
CIO Area: CIO 001 to CIO 6128 (*1)
LR Area:
LR 00 to LR 184 (*2)
DM Area:
DM 0000 to DM 32752
EM Area:
Banks 00 to 12, EM 0000 to EM 32752
*1: When IR 000 is specified or when the default setting (
––––
)
is left unchanged, the default first status word will be used.
Refer to 5-4 Checking Data Link Status for details.
Refer to 5-4 Checking Data Link Status for details.
*2: When a word between LR 000 and LR 184 is specified, the
data link area will be allocated between CIO 1000 and
CIO 1184.
CIO 1184.
Area 1
Data link
start word
start word
CIO Area: CIO 000 to CIO 6143
LR Area:
LR 00 to LR 199 (*)
DM Area:
DM 0000 to DM 32767
EM Area: Banks 00 to 12, EM 0000 to EM 32767
Unit Ver. 1.2 or later: The same memory areas can be set for
both Area 1 and Area 2.
both Area 1 and Area 2.
*:
When a word between LR 000 and LR 199 is specified, the
data link area will be allocated between CIO 1000 and
CIO 1199.
data link area will be allocated between CIO 1000 and
CIO 1199.
Number of
words
words
Remote nodes: 0 to the number of source words
Set the number of words to be received.
Local node:
0 to 1,000
Set the number of words to be transmitted.
Set the number of words to be transmitted.
The total number of words in area 1 and area 2 in each node
must not exceed 1,000.
must not exceed 1,000.
The numbers of words in both area 1 and area 2 in each node
must not be set to 0.
must not be set to 0.
Offset
Remote nodes: 0 to one less than number of source words
Set the offset for the data to be received.
Local node: Cannot be set.
This setting is not required if an offset is not used.
Area 2
Data link
start word
start word
CIO Area: CIO 000 to CIO 6143
LR Area:
L
R 00 to LR 199 (*)
DM Area:
DM 0000 to DM 32767
EM Area:
Banks 00 to 15, EM 0000 to EM 32767
(EM must be installed)
(EM must be installed)
Unit Ver. 1.2 or later: The same memory areas can be set for
both Area 1 and Area 2.
both Area 1 and Area 2.
*: When a word between LR 000 and LR 199 is specified, the
data link area will be allocated between CIO 1000 and
CIO 1199.
CIO 1199.
Number of
words
words
Remote nodes: 0 to the number of source words
Set the number of words to be received.
Local node:
0 to 1,000
Set the number of words to be transmitted.
Set the number of words to be transmitted.
The total number of words in area 1 and area 2 in each node
must not exceed 1,000.
must not exceed 1,000.
The numbers of words in both area 1 and area 2 in each node
must not be set to 0.
must not be set to 0.
Offset
Remote nodes: 0 to one less than number of source words
Set the offset for the data to be received.
Local node:
Cannot be set.
This setting is not required if an offset is not used.
Setting item
Setting range