Nokia Ad-5B Benutzerhandbuch

Getting started

Attach the Nokia Wireless Audio Adapter into the Pop-Port connector of your
phone. Note that your phone should be in standby mode, ready to use, and it
should not have any characters keyed in. The adapter blinks once briefly in green
to indicate that the power is on. If the adapter has not been paired with any
headsets, the state is indicated with a slow, continuous red blink.

Note that if you have the keylock of your phone on,
the keylock is automatically deactivated after you
have attached the adapter into the phone. Note
also that if you have the Silent profile on in your
phone, the automatic answering does not work.
Also Lights off mode in your phone should be
activated, because having the lights continuosly
on reduces the battery life.

Pairing the device

Switch on the power before you start to pair your headset with the Nokia Wireless
Audio Adapter. Make sure no other headsets or other compatible audio devices are
active within a 10 metre range.

1. Attach the adapter into the Pop Port connector of your phone. Wait for the

slow red blink. Select the PIN entry mode by pressing once the Control key in
the Wireless Audio Adapter to make the adapter find the compatible headset.

If a compatible headset is found, the light indicator in the adapter is
continuously green for 20 seconds. During that time you need to start keying in
the Bluetooth passkey on the phone keypad.