Nokia Ad-5B Benutzerhandbuch

Seite von 16
G e t t i n g   s t a r t e d
7
English
■ Using the adapter for the first time
Before you can use the Wireless Audio Adapter, you need to 
associate, "pair", it with the headset you want to use. The 
compatible headset must support Bluetooth Specification 1.1. 
For pairing you need the adapter, a compatible phone, and the 
headset including its PIN code. You only need to pair each 
individual headset once.
Attach the Nokia Wireless Audio Adapter into the Pop-Port 
connector of your phone. Note that your phone should be in 
standby mode, ready to use, and it should not have any 
characters keyed in. The adapter blinks once briefly in green to 
indicate that the power is on. If the adapter has not been 
paired with any headsets, the state is indicated with a slow, 
continuous red blink.
Note that if you have the 
keylock of your phone on, 
the keylock is automatically 
deactivated after you have 
attached the adapter into 
the phone. Note also that if 
you have the Silent profile 
on in your phone, the 
automatic answering does 
not work. Also Lights off mode in your phone should be 
activated, because having the lights continuously on reduces 
the battery life. 
AD-5B_En_1st_tab.fm  Page 7  Friday, April 9, 2004  2:57 PM