OKI 3100e Benutzerhandbuch
12
OkiLAN 320e Network Card
Installing as RAW printer
1.
Complete the printer driver installation as in
“Installing as LPR printer” on page 11.
“Installing as LPR printer” on page 11.
2.
Open [Control Panel] and double-click on
[Printers].
[Printers].
3.
Right-click the installed printer on [Printers]
screen and select [Properties].
screen and select [Properties].
4.
Click on [Configure Port…] on [Ports] tab.
5.
Select
[Raw]
as
[Protocol]
selection
on
[Configure Standard TCP/IP Port Monitor].
6.
Check if [Port Number] text box is set to [9100]
on [Raw Settings] screen. If not, enter [9100] in
the [Port Number] text box.
on [Raw Settings] screen. If not, enter [9100] in
the [Port Number] text box.
7.
Click on [OK] and end setting up.
Installing as NetBEUI Printer
Setting up OS network settings
1.
Open the [Control Panel] and double-click on
[Network and Dial-up Connections].
[Network and Dial-up Connections].
2.
Double-click on [Local Area Connection] and
click on [Properties].
click on [Properties].
3.
Click on [Install…] button on [Local Area
Connection Properties] screen.
Connection Properties] screen.
4.
Select [Protocol] on [Select Network Component
Type] screen and click on Add…].
Type] screen and click on Add…].
5.
Select [NetBEUI Protocol] on [Select Network
Protocol] screen.
Protocol] screen.
6.
Click on [OK] and end setting up.
Setting up printer network settings
The workgroup name and host name must be set to the
printer. These names must be the same as those used in
“Chapter 4 - Administrating Network Printers” on
page 39.
printer. These names must be the same as those used in
“Chapter 4 - Administrating Network Printers” on
page 39.
W it h N e t wo rk C ar d fi rm w ar e V e r. 1 .0 6. T he
workgroup name must be same as the name of the
workgroup to which the printer belongs.
workgroup name must be same as the name of the
workgroup to which the printer belongs.
With Network Card firmware Ver. 1.10. Default
workgroup and Host name can be used.
workgroup and Host name can be used.
Installing the printer driver
1.
Double-click on [Printers], then double-click on
[Add Printer].
[Add Printer].
2.
[Add Printer Wizard] is displayed. For printer
management, select [Network printer] and click
on [Next>].
management, select [Network printer] and click
on [Next>].
3100euGB.book Page 12 Friday, March 16, 2001 1:18 PM