Nortel Networks 201i Benutzerhandbuch

November 2006

Connecting peripheral devices to the 201i server

201i Server Hardware Installation

157

2 Attach the serial cable as follows:

a. Connect the 25-pin male end of the serial cable to the modem.

b. Attach the 0.25-inch nuts to the thumbscrews on the 9-pin female 

connector on the serial cable.

c. Connect the 9-pin female connector to the RS-232 COM1 connector 

on the multi I/O cable and tighten the nuts.

3 Connect one end of the RJ-11 phone cord to the line jack on the modem 

and the other end to an analog jack.

4 Plug the power cord into an electrical outlet with an isolated ground.

5 Plug the other end of the power cord into the modem power connector.

Result: The back of the modem appears similar to the following:

Connect the modem to an analog line only. The use of a 
non-analog line (for example, digital or Multiline) can 
damage the modem.

G101445

RJ-11 
connection

DIP 
switches

Switch positions:

Serial cable
(RS-232)
connection

Power
connection

1 2 3 4

5 6 7 8

OFF

ON