Omron NT31 NT31C Benutzerhandbuch

5. Wrap vinyl tape over the cut off end of the shielding wire.

40 (1.57) (RS-232C)

5

25 (0.98) (RS-422A)

(1)

(2)

(3)

(4)

(5)

Units: mm (inch)

Vinyl tape

(0.19)

1. Slide heat-shrink tube over each wire.

2. Pre-solder each wire and connector terminal.

3. Solder each wire to each connector terminal.

Soldering iron

Heat-shrink tube

(F, 1.5 mm dia., 

ȏ = 10 mm)

1 mm

4. Push the heat shrink tube over the soldered joint and heat the tube to shrink it in place.

Heat-shrink tube

Assemble the connector hood as shown below.

Aluminum foil tape

End connected to FG

End not connected to FG