Fuji Bikes UG230 Series Benutzerhandbuch
6
2. Main Menu Screen
6-33
P
Set the IP address on the Main Menu screen.
1.
Press the [Ethernet] switch on the Main Menu screen to bring up the Ethernet screen.
2.
Change the switch on the screen into [Select IP Address from Network Table.].
3.
Select the desired IP address by changing the network table number.
4.
Press the [Setting Finished] switch to move back to the Ethernet screen.
Setting 3
Set the IP address on the editor.
1.
On the editor, chick [System Setting], [Unit Setting] and [IP Address Setting]. The [IP Address
Setting] dialog is displayed.
Setting] dialog is displayed.
2.
Check [
IP Setting].
3.
Set the following options.
• IP Address
• Default Gateway
• Sub Net Mask
• Port No.
• Send Timeout
• Memory Protect
4.
Click the [OK] button and transfer the screen data. The IP address set above can be checked on
the “Ethernet Information” screen to be displayed from the Main Menu screen.
the “Ethernet Information” screen to be displayed from the Main Menu screen.