Fuji Bikes UG230 Series Benutzerhandbuch

2-18

 

4. Modular Jack (MJ1/MJ2)

Printer Connection (Serial Printer)

• To connect a printer through serial interface, connect the cable to a modular jack (MJ1/MJ2).
• Refer to the specification sheet of the printer to be used for the connecting cable for serial 

interface.  For information on MJ1/MJ2 signals, refer to page 2-10.

• To connect to a printer equipped with a parallel interface, use a commercially available 

parallel-serial converter.
When the serial connector of the converter is a D-sub 9-pin male connector, use Fuji’s UG00C-T 
connection cable.

Compatible Printer Models

Control code system:

• PR201

PC-PR201 series compatible with MS-DOS computer

• ESC-P

ESC/P24-J84, ESC/P-J84, ESC/P super function compatible 
with MS-DOS computer

Others

• CBM292/293

CBM’s line thermal printer
(Screen hard copying is not possible.)

• MR400

Sato’s barcode printer “MR400 series”
(It is not possible to print a screen hard copy, data sheet or 
sampling data.)

• EPSON STYLUS PHOTO series

EPSON color ink jet printer STYLUS PHOTO series
(For printer models, refer to the User’s Manual 
<Supplementary Manual> (FEH376-1).)

Screen Data Setting

From the [System Setting] menu, select [Printer Setting] and open the [Main] tab window.

• Type: (as desired)
• Port: Serial Port (MJ Port) → Go to the [Serial Port] tab window for communication setting.

↓

[Refer to Modular] button

↓

• Modular Jack 1 (or 2)

Printer (Serial Port)

Set the above options.

MJ

UG230

Printer

UG00C-T

Parallel 

←→ serial converter

D-sub 25-pin 

←→ 9-pin converter

Parallel port