Nortel Networks 4050 Benutzerhandbuch
512 Chapter 10 Configuring system settings
320818-A
2
Enter the interface information in the applicable fields.
describes
the Interface configuration fields.
Table 100
Interface fields
Field
Description
Index
An integer in the range 1 to 252 that uniquely identifies the
interface on the Nortel SNAS 4050.
interface on the Nortel SNAS 4050.
This field cannot be changed after the interface is added.
Ip Address
Sets the network address for the interface. (For Interface 1,
the network address is the RIP.)
the network address is the RIP.)
Gateway
Sets the default gateway address for the interface. The
default gateway is the IP address of the interface on the
core router that will be used for management traffic (such
as requests to private authentication servers and DNS
servers).
default gateway is the IP address of the interface on the
core router that will be used for management traffic (such
as requests to private authentication servers and DNS
servers).
The default gateway will be used only for Nortel
SNAS 4050 domains that point to this interface. If no
domain points to this interface, the specified gateway will
be ignored.
SNAS 4050 domains that point to this interface. If no
domain points to this interface, the specified gateway will
be ignored.
Netmask
Sets the subnet mask for the interface.
VlanId
Specifies the VLAN tag if packets received by the interface
are tagged with a specific VLAN tag ID.
are tagged with a specific VLAN tag ID.