Nortel Networks 4050 Benutzerhandbuch
518 Chapter 10 Configuring system settings
320818-A
From the selected static route screen, complete the following tasks as necessary:
•
•
Adding a static route
To add a static routes, perform the following steps:
1
Select the static route from the table.
2
Click Add.
The Add Route dialog box appears (see
).
Figure 139
Add Route
3
Enter the static route information in the applicable fields.
describes
the Add Route fields.
Table 101
Add Route fields
Field
Description
Destination Address
Specifies the static route destination IP address.
Netmask
Specifies the network mask to apply to the IP address.
Gateway
Specifies the IP address on the core router.
Note: When you add a static route to the system, host, or interface
configuration, the route is automatically assigned an index number.
There are separate sequences of index numbers for routes configured for
the cluster, for each host, and for each interface.
configuration, the route is automatically assigned an index number.
There are separate sequences of index numbers for routes configured for
the cluster, for each host, and for each interface.