Fuji Bikes FEH381 Benutzerhandbuch
6-32
2. Main Menu Screen
Setting 2
*1
Network Table
Register IP addresses and other information for the UG230, PLCs or computers that should be included for
Ethernet communications on the UG00S-CW editor.
([System Setting]
Register IP addresses and other information for the UG230, PLCs or computers that should be included for
Ethernet communications on the UG00S-CW editor.
([System Setting]
→
[Network Table Setting]
→
[Ethernet]
→
Edit Network Table)
If you would like to use the IP address of the registered network table, select [IP Address from Network Table].
Cursor switches
Increment/Decrement switch for
the value in the cursor position
the value in the cursor position
Determines the setting such as IP address,
and moves back to the Main Menu screen.
and moves back to the Main Menu screen.
Used for checking the
10BASE-T interface.
10BASE-T interface.
Normal:
Connect
Error:
Disconnect
The Ethernet screen is displayed.
By pressing the [IP Address Setting] switch,
the desired IP address can be selected from
the network table.
The switch changes into [Select IP Address
the desired IP address can be selected from
the network table.
The switch changes into [Select IP Address
from Network Table.].
*1
Network table
number