Fuji Bikes FEH381 Benutzerhandbuch

6

1. Operational Procedures

6-3

P

• UG230 + UG230A-DCL (option unit)

1.

Transferring screen data via the UG00C-T or USB cable
Transfer screen data from the computer while the initial screen is displayed.

2.

Transfer screen data from a CF card.

1) Transfer screen data from the computer to a CF card.

2) Insert the CF card into the option unit.

3) Press the [CF Card (English)] switch.  The “Card Menu” screen 

is displayed.

4) Follow the instructions as described in “Card Menu Screen” 

(page 6-15) and transfer screen data.

3.

Transferring screen data via Ethernet

1) Press the [IP Address (English)] switch.

2) The “Ethernet” screen is displayed.

Follow the instructions as described in “Ethernet (Optional)” 
(page 6-29) and set the IP address.
Press the [Setting Finished] switch.  The initial screen is displayed again.

3) Transfer screen data from the computer via Ethernet.

• Auto-uploading screen data from the CF card to the UG230

1) Transfer screen data from the computer to a CF card.

2) Turn the UG230 off.  Set the DIPSW1 on the UG230 to the ON position, and insert the CF 

card into the USB CF card reader/writer or the option unit.

3) Turn the UG230 on.  The screen data is automatically uploaded from the CF card to the 

UG230.