Fuji Bikes FEH381 Benutzerhandbuch
6
2. Main Menu Screen
6-15
P
2.
Card Menu Screen
When the [Card Menu] switch on the Main Menu screen is pressed, the following “Card Menu” screen
appears.
This screen is used to transfer screen data between the UG230 and a CF card or a memory card.
appears.
This screen is used to transfer screen data between the UG230 and a CF card or a memory card.
1.
[Card Recorder Menu] switch
Press this switch when connecting the card recorder to the MJ port of the UG230 and transferring
screen data between the UG230 and a memory card.
Press this switch when connecting the card recorder to the MJ port of the UG230 and transferring
screen data between the UG230 and a memory card.
2.
[Screen Data] switch
Press this switch when transferring screen data between the UG230 and a CF card.
Press this switch when transferring screen data between the UG230 and a CF card.
3.
[SRAM] switch
Press this switch when saving backup copies of the SRAM memory or when uploading the backup
data from the CF card to the UG230.
Press this switch when saving backup copies of the SRAM memory or when uploading the backup
data from the CF card to the UG230.
4.
[Built-in Socket] switch
The CF card insertion position can be selected. If using a CF card while the option unit is
mounted, press this switch.
The CF card insertion position can be selected. If using a CF card while the option unit is
mounted, press this switch.
5.
[USB Port] switch
The CF card insertion position can be selected. If using a CF card while a CF card reader/writer
(commercially available) is connected to the USB-A (master port), press this switch.
The CF card insertion position can be selected. If using a CF card while a CF card reader/writer
(commercially available) is connected to the USB-A (master port), press this switch.
The Main Menu screen is displayed again.
1.
2.
3.
4.
5.