Gateway E-9525R Benutzerhandbuch
Replacing the control panel adapter card
www.gateway.com
59
Replacing the control panel adapter card
Caution
Your server must be operated with a
control panel in place.
To replace the control panel adapter card:
1
Follow the instructions in
. Make sure that you turn off the server, then unplug the power
cord(s) and all other cables connected to the server.
2
Follow the instructions in
.
3
Remove the fan duct and system fans by following the instructions in
4
5
Loosen the thumbscrew (1) on the control panel adapter card, then pull
the adapter card (2) toward the back of the assembly to disengage the
locking tabs.
the adapter card (2) toward the back of the assembly to disengage the
locking tabs.
6
Remove the control panel adapter card and store it in a static-free bag.
7
Holding the new control panel by the edges, align it with the locking tabs
in the assembly, then place it on the tabs and slide it toward the front of
the assembly.
in the assembly, then place it on the tabs and slide it toward the front of
the assembly.
8
Tighten the thumbscrew to secure the control panel adapter card in the
assembly.
assembly.
9
Insert the media cage into the assembly bay in the chassis.
10
Secure the assembly by tightening the thumbscrew you previously
loosened.
loosened.
11
Connect the data and power cables to the back of the drives.
12
Reinstall the fan duct and system fans by following the instructions in
13
Follow the instructions in
1
2