Star Micronics TCP400 Series Benutzerhandbuch

– 1 –

Carefully read and obey the following items to prevent injury to yourself or to others
and to prevent damaging property.

1.  Setup the reader/writer in a solid, and level location.

2.  Do  not  use  or  place  the  reader/writer  in  areas  exposed  to  direct  sunlight,  or  near

heat sources.

3.  Avoid using or storing the reader/writer in areas of high humidity.

Do not use or store liquids near the reader/writer.

4.  Avoid using or storing the reader/writer in locations where there is dust or other air-

borne particles.

5.  Avoid  using  the  reader/writer  in  locations  where  corrosive  gases,  ignition  gases,

chemicals or vapors are emitted.

6.  Do not operate the reader/writer near devices which may produce magnetic fields

or interference.

7.  Do not get power from a circuit to which electrical devices that generate electrical

noise are connected.

8.  Connect a grounding wire to use this device safely.

9.  Allow plenty of space around the reader/writer for ventilation.

1.  Use only Star recommended cards.

2.  Do not use cards that are dirty or oily or wet in any other manner. Also, do not han-

dle cards with dirty or wet hands. Do not apply tape or glue to cards.

3.  Do  not  place  cards  near  devices  that  generate  magnetic  fields  (such  as  cellular

telephones, speakers, televisions, etc.).

4.  Do  not  place  cards  in  direct  sunlight  or  high  temperature  areas  (such  as  dash-

boards in automobiles), as high temperatures can cause cards to bend or can erase
the information recorded on cards.

5.  Do not use bent cards, as this can cause them to become jammed in the reader/

writer.

6.  Insert cards in the indicated direction.

7.  Never insert anything other than the appropriate cards into the reader/writer.