Technicolor - Thomson 8900NET Benutzerhandbuch

 

This section describes placing the module in the Gecko 8900 frame and 
cabling the communications ports. Procedures for power-up, DIP switch 
settings, and network configuration of the module are described in fol-
lowing sections.

 

There are ten cell locations in the frame to accommodate either analog or 
digital modules. These are the left ten locations. Refer to 

The two cells on the right are allocated for the power supplies. For addi-
tional information concerning the Power Supply module, refer to the 

 

.

The third cell from the right is allocated for the 8900NET Network Interface 
or Frame Monitor module. For additional information concerning the 
Frame Monitor module, refer to the 

 

.

 

The 8900NET module can be plugged in and removed from a Gecko 8900 
Series frame with power on. When power is applied to the module, LED indi-
cators reflect the initialization process (see 

 

Frame Monitor

or 8900NET Network 

Interface Module (only)

Any 8900 Module

Power 

Supplies

(only)

0612-04r1