TANDBERG D13639 Benutzerhandbuch
TANDBERG MPS API
User Guide
32
*s/end
xcom disc
*r Result (status=OK): /
*r/end
OK
NO CARRIER
*s Call 1 (status=Disconnected, type=NA, protocol=NA, direction=NA):
*s/end
When conditional XPath expressions are used, the system will provide feedback on all elements
within the address the first time the condition is true.
Example 2.23
User wants to monitor call changes only when the call is in Synced state. By registering the
below expression, the system will not provide feedback on the call before it reaches the Synced
state. When it first enters the Synced state it will provide status for the complete call. After this,
the system will only give feedback on elements changing values (provided that the call is still in
Synced state).
xfeedback register status/call[@status="Synced"]
OK
xcom dial 10.47.15.127
*r Result (status=OK):
CallRef: 1
LogTag: 5
*r/end
OK
CONNECT
*s Call 1 (status=Synced, type=Vtlph, protocol=H323,
direction=Outgoing):
CallRate: 768
RemoteNumber: "10.47.15.127"
Mute: Off
Microphone: Off
Duration: 0
Channels 1 (type=Incoming):
Rate: 768
Restrict: Off
Encryption (status=Off): /
Audio (status=Active):
Protocol: G722
Rate: 64
Video 1 (status=Active):
Protocol: H263
Resolution: CIF
Rate: 704
Video 2 (status=Inactive): /
Data (status=Inactive): /
Channels 2 (type=Outgoing):
xcom disc
*r Result (status=OK): /
*r/end
OK
NO CARRIER
*s Call 1 (status=Disconnected, type=NA, protocol=NA, direction=NA):
*s/end
When conditional XPath expressions are used, the system will provide feedback on all elements
within the address the first time the condition is true.
Example 2.23
User wants to monitor call changes only when the call is in Synced state. By registering the
below expression, the system will not provide feedback on the call before it reaches the Synced
state. When it first enters the Synced state it will provide status for the complete call. After this,
the system will only give feedback on elements changing values (provided that the call is still in
Synced state).
xfeedback register status/call[@status="Synced"]
OK
xcom dial 10.47.15.127
*r Result (status=OK):
CallRef: 1
LogTag: 5
*r/end
OK
CONNECT
*s Call 1 (status=Synced, type=Vtlph, protocol=H323,
direction=Outgoing):
CallRate: 768
RemoteNumber: "10.47.15.127"
Mute: Off
Microphone: Off
Duration: 0
Channels 1 (type=Incoming):
Rate: 768
Restrict: Off
Encryption (status=Off): /
Audio (status=Active):
Protocol: G722
Rate: 64
Video 1 (status=Active):
Protocol: H263
Resolution: CIF
Rate: 704
Video 2 (status=Inactive): /
Data (status=Inactive): /
Channels 2 (type=Outgoing):