Thomson DVD Recorder DTH 8045 E DTH8045 Benutzerhandbuch

Produktcode

DTH8045

Safety information - UK socket

Equipment for the UK is supplied with a mains cable fitted with a moulded plug.

Mains connection

This appliance is suitable for use on A.C. mains supply, 220-240 V - 50 Hz only. It must not be
connected to D.C. mains.

Note:The mains lead of the appliance is fitted with a moulded plug. If the mains sockets are not
compatible or if for any reason the plug is removed please follow the directions below.

The moulded plug cannot be rewired and if removed must be disposed of safely. Remove the fuse to
make it safer.

Do NOT under any circumstances plug the severed plug into any mains socket as this could
result in an electric shock.

The OFF button

B on the remote control and appliance does not completely disconnect the unit from

the mains supply, but switches operating power on and off.

Important!

If the plug is removed, rewire new plug as follows:The wires in the mains plug
are coloured in accordance with the following code:

BLUE - NEUTRAL

BROWN - LIVE

As the colours of the wires in the mains lead of this apparatus may not
correspond with the coloured markings identifying the terminals in your plug,
proceed as follows:

BLUE wire to the terminal coded N (Neutral) or coloured black.

BROWN wire to the terminal coded L (Live) or coloured red.

Do NOT make any connection to the terminal in the plug which is marked by the letter E
or by the safety symbol l

l or coloured green and yellow.

A fused plug must be fitted with a 3A fuse approved by ASTA or BSI to BS 1362
and fuse covers must always be securely replaced.

If the fuse blows, check the mains cable for damage or call a
qualified technician. Do not try to bridge the fuse or increase its
rating!

BLUE

BROWN

0_DTH8045E_cov.qxd 5/04/05 11:45 Page 3