Lantronix MPS100 Benutzerhandbuch
Frequently-used Commands
F - 9
DEFINE PORT 1 FLOW
option
CTS
SpeciÞes CTS/RTS (hardware) ßow control.
{EN|DIS}
Activates or deactivates the currently-conÞgured
ßow-control method.
ßow-control method.
NONE
Removes the current ßow control settings.
XON
SpeciÞes XON/XOFF (software) ßow control.
DEFINE PORT 1 NAME
“
newname
”
Enter a name of up to 16 alphanumeric characters for
the speciÞed port.
the speciÞed port.
DEFINE PORT 1
PARITY option
parity
Enter even, odd, mark, or space. Specifying mark or
space
space
will change the character size to 7 bits.
NONE
SpeciÞes that no parity will be used (the default).
DEFINE PORT 1 SPEED baudnum
Sets the portÕs baud rate. Acceptable
baudnum
values range from 300 to 115200 baud (or 230000
baud for 1ooBASE-T Servers).
baud for 1ooBASE-T Servers).
{SHOW|MONITOR} PORT 1
Displays the portÕs conÞguration characteristics once
(Show) or continually every three seconds (Monitor).
Counters and Status keywords can be added.
(Show) or continually every three seconds (Monitor).
Counters and Status keywords can be added.
TEST PORT 1 option
COUNT rows
WIDTH cols
Sends an ASCII data stream to the port for the
speciÞed number of rows and/or columns.
speciÞed number of rows and/or columns.
POSTSCRIPT
Sends a PostScript test page to the port.
Table F-2:
Port Commands, cont.
Command
Option(s)
Description