Delta Electronics DOP-AS Series Benutzerhandbuch
Chapter 3 Element Function|ScrEdit Software User Manual
3-46
Revision Apr. 30th, 2007, 2007PDD23000002
3.10 Input Display
Fig. 3.10.1 Input element options
Set write and read address for the user to input and display address value. Write and read address can be
the same or different.
Table 3.10.1 Function of Input elements
Element Type
Icon
Function
Numeric Entry
It is used to input and display the numeric value of designated address.
Character Entry
It is used to input and display the characters of specific designated address.
Numeric Entry
Table 3.10.2 Property Description of Numeric Entry Element
Property Description of Numeric Entry Element
After pressing this numeric entry element on the screen, a system built-in numeric keypad (TEN-KEY) will
show up and the user can use it to input the setting value directly. When pressing ENTER key, HMI will send
the input setting value to the corresponding register. The maximum and minimum input setting values are all
user-defined. The user can also specify the trigger mode to trigger the designated PLC address before or
after writing the setting value.
show up and the user can use it to input the setting value directly. When pressing ENTER key, HMI will send
the input setting value to the corresponding register. The maximum and minimum input setting values are all
user-defined. The user can also specify the trigger mode to trigger the designated PLC address before or
after writing the setting value.
Write Address
Read Address
Read Address
The address can be internal memory or the controller address. (Please refer to Table
3.2.2 Property Description of General Buttons.)
If only the write address is set, HMI will read the value of the write address
automatically.
3.2.2 Property Description of General Buttons.)
If only the write address is set, HMI will read the value of the write address
automatically.
Text Size
Text Color
Text Color
The user can set the text size and text color that provided by HMI to determine the
text display on the element. HMI provides 8~64 kinds of default text font for the user
to use.
text display on the element. HMI provides 8~64 kinds of default text font for the user
to use.
Border Color
Background Color
Background Color
Border Color option can be set only when the style of the numeric entry element is
selected as Raised and Sunken. The style of the element below is selected as
“Rasied”. Its background color is set to blue and its border color is set to red.
selected as Raised and Sunken. The style of the element below is selected as
“Rasied”. Its background color is set to blue and its border color is set to red.
(If the style of the element is set to Transparent, the Border Color and
Background Color these two options are disabled.)
Standard
Raised
Sunken
Transparent
Style