Lucent Technologies 518-456-10 Benutzerhandbuch
20
Accessing the Programming
Main Menu
Main Menu
To access the Programming Main Menu:
1.
Call PARTNER Voice Messaging.
■
If calling internally, press
i777
or the programmed VMMsgs
button.
■
If calling from outside the system, press
*Q
(
*7
) during the general
mailbox greeting.
The system plays a greeting followed by: “Enter mailbox number
followed by a password.”
followed by a password.”
2.
Enter
0
and the four-digit password. (The factory-set password is 1234.)
The system plays: “To assign a mailbox to an extension, press
1
. To
administer the general greeting, press
3
. To change your password,
press
5
. To initialize a mailbox, press
6
. To re-initialize a mailbox pass-
word, press
9
followed by the mailbox number.”
NOTE:
The first time you access this menu, you should change the factory-set
password. Use a hard-to-guess value, and record it in a safe place. See
“Changing the System Manager’s Password” on page 23.
password. Use a hard-to-guess value, and record it in a safe place. See
“Changing the System Manager’s Password” on page 23.
Programming Guidelines
Once you are familiar with PARTNER Voice Messaging, use these shortcuts to
save time while programming:
save time while programming:
■
You do not have to wait for a prompt to play before entering digits for the
next step.
next step.
■
Press
*Q
(
*7
) at any point during programming to return to the
Programming Main Menu.
■
To ensure that you hear voice prompts, turn off your microphone when
using the speakerphone to program the system.
using the speakerphone to program the system.
■
Use the handset rather than the speakerphone to record greetings to avoid
background noise in your recordings. Hang up to exit programming.
background noise in your recordings. Hang up to exit programming.