Wayne-Dalton WDSF-10 Benutzerhandbuch

17

To add a scene or zone:
1.  Go to the Scene or Zone tab, then 
Click the ADD SCeNe or ADD ZoNe 
button, respectively.  This button is found 
at the bottom of the list of scenes or 
zones.

2.  The software will prompt you to name 
the scene or zone.  enter a name, and 
then press the button to continue.  You 
may also be presented with additional 
instructions.

3.  To include modules into this scene 
or zone, simply click on the icon of 
the module(s) you wish to add.  The 
module’s icon will be circled on the 
screen indicating that it is now part of 
the scene or zone.
a.)  When including dimming modules 
into a scene, the module’s level will be 
recorded for use when the scene is ac-
tivated.  To change the module’s desired 
level for the scene, press-and-hold the 
left mouse button or right-click on the 
module’s icon and utilize the pop-up 
options.
b.)  There are two special scenes built 
into the scenes tab: ALL oN and ALL 
oFF.  These scenes will turn the selected 
modules to the oN or oFF position when 
activated, and changing these scenes 
will affect the ALL oN and ALL oFF 
features of all remote controllers in the 
network.  Changing the modules’s cur-
rent level will not be reflected in these 
scenes.
c.)  When including modules into a zone, 
the current level of the module is not 
relevant.  Modules in a zone all turn on 
or off together.

4.  To record the scene or zone, press 
the same Scene or Zone button you 
created in Step 2.  The highlight on the 
button will then go away.









                      Click the ADD SCeNe button. 

         Click the modules you wish to add to that scene. 

         Click the scene button you just created.