Manualsbrain.com
  1. Handbücher
  2. Marken
  3. VIVOTEK
  4. VS2403
  5. Benutzerhandbuch

VIVOTEK VS2403 Benutzerhandbuch

Download
Seite von 84
 
 
 
 
              - 9 - 
 
 
 
 
  
www.vivotek.com 
Item 
LED status 
Description 
LED1 and LED2 blink alternately by 150ms 
During the test 
LED1 blinks one time and LED2 blinks 3 times  TM1302 test fail 
Power-On-Self-Test 
LED1 blinks one time and LED2 blinks 4 times  RTL8100BL test 
fail 
LED1 off, LED2 off 
Network fail 
Network 
LED1 blink every 0.5 second, LED2 off  
Network normal, 
Heartbeat 
Camera control 
LED2 blink every 1 second 
Get the control 
message 
 
BNC video inputs 
Video Server allows up to four cameras attached at the same time. To ensure video 
modulation type being detected correctly, cameras should be attached sequentially from 
“VIDEO1” to “VIDEO4” and powered on before Video Server is powered on. 
 
 
DIP switches “1” to “4” 
There are four DIP switches numbered from “1” to “4” in the front panel regarding of 
each video input. They are used to enable the 75-ohm resistance of video impedance. 
They should be kept ON if the video input is terminated in the Video Server or left in high 
impedance for looping. 
 
 
Auxiliary button “RESET” 
There is a button located at the left of “VIDEO4” in the front panel. Refer to the Appendix 
Troubleshooting for the detailed usage of system recovery.