Raritan Computer EMX2-111 Benutzerhandbuch
Chapter 9: Using SNMP
202
Enabling SNMP
By default, SNMP v1/v2c is enabled on the EMX so the EMX can
communicate with an SNMP manager. If you have disabled the SNMP, it
must be enabled to communicate with an SNMP manager.
communicate with an SNMP manager. If you have disabled the SNMP, it
must be enabled to communicate with an SNMP manager.
Note that read-only access is enabled and the community string is public.
To enable SNMP:
1. Choose Device Settings > Network Services > SNMP. The SNMP
Settings dialog appears.
2. Select the "enable" checkbox in the "SNMP v1 / v2c" field to enable
communication with an SNMP manager using SNMP v1 or v2c
protocol.
protocol.
Type the SNMP read-only community string in the Read
Community String field. Usually the string is "public."
Type the read/write community string in the Write Community
String field. Usually the string is "private."
3. Select the "enable" checkbox in the "SNMP v3" field to enable
communication with an SNMP manager using SNMP v3 protocol.
Tip: You can permit or disallow a user to access the EMX via the
SNMP v3 protocol. See
SNMP v3 protocol. See
Configuring Users for Encrypted SNMP
v3
(on page 208).
4. Enter the MIB-II system group information, if applicable: