RAD Data comm IPmux-1E Benutzerhandbuch

IPmux-1/1E Installation and Operation Manual

Chapter 5 Application Configuration Procedures

Configuring the Management Option

5-15

Remember to press <Enter> after modifying each parameter. Press <S> to save

all changes on the menu.

AUTHENTICATION/COMMUNITY MENU

1. Authentication Failure Trap

2. Trap

Public

3. Read

Public

4. Write

Public

ESC> Exit

Select item from the menu:

Figure 5-8. Authentication/Community Menu

Verify that your Read and Write communities on the NMS match the ones on

IPmux-1/4.

Manager List

➤

To configure the Manager in IPmux-1/4:
1. From the Management Configuration menu, press 2 Manager List (see

Figure 5-9).

2. Enter the Manager IP Address (the Manager IP Address in Figure 5-9 is used

as an example. Choose the Manager IP Address of your application).

3. Select Status Change Trap according to your application requirements (for

details refer to Manager List in the IPmux-4 manual.

4. Select Alarm Trap according to your application requirements (for details refer

to Manager List in the IPmux-4 manual.

5. Select System Trap according to your application requirements (for details

refer to Manager List in the IPmux-4 manual.

6. Press <S> to save the configuration.
7. Press <Esc> a few times to return to the Main menu.

Remember to press <Enter> after modifying each parameter. Press <S> to save

all changes on the menu.

Main Menu

↓

2. Configuration

↓

1. General
Configuration

↓

3. Management
Configuration

↓

2. Manager List

Note

Order from: Cutter Networks

Ph:727-398-5252/Fax:727-397-9610